Wykamol Group
Thor Helical Remedial / Structural Solutions
Engineered Structural Solutions
0845 400 6666
Make enquiry
 

Crack Sealer Plus

Special Features:

  • Two part non-shrink, epoxy resin injection system
  • Gels rapidly and cures within 12 hours
  • Combines with substrate to create high bond strengthCrack Sealer Plus 1 (small)
  • Reduces viscosity under injection pressure to fill micro cracks
  • Flexible 2mm & 4mm injection nozzles for ultra-fine crack injection

Applications

  • Seal cracks in bricks, blocks, render and concrete
  • Bond fractured masonry
  • Fill fine cracks without injection ports

Benefits

  • Quick and easy to use brick adhesive
  • Ideal for all types of cracked masonry
  • Provides a waterproof seal
  • Fills cracks from 2mm-12mm wide without injection ports
  • Complements crack stitching for structural crack repairs

 

Crack Sealer Plus 3 (small)Wykamol Crack Sealer Plus is a 2-part thixotropic epoxy adhesive. It may be used in film thicknesses between 0.2mm and 12mm. Wykamol Crack Sealer Plus is specifically formulated for reapiring fine cracks in brick, block, stone, concrete or masonry.Wykamol Crack Sealer Plus is supplied in two screw cap containers, one contains the base resin the other contains the curing agent. Included is a follower plate, empty cartridge, adaptor nozzle and a flexible polymer tip.Wykamol Crack Sealer Plus is a high strength cosmetic repair gap filling adhesive with low pressure crack injection. Colours available are Stone Grey and Brick Red.

 

Cracks and fissures should be treated by air blower or vacuum in order to remove loose or friable dust. For detailed information on injection techniques and preparation, consult our Technical Bulletin and Technical Information Sheet.

 

 

Add the total contents of the smaller container (hardener) to the contents of the larger container (base). Mix the two pastes thoroughly, ideally using a mixing knife. Place the follower-plate onto the surface of the mixed material ensuring it fits parallel in the tub with the outer and central lip pointing upwards. Place the back end of the cartridge vertically and centrally over the hole in the follower-plate. Press the cartridge firmly and continuously down on the follower-plate until the follower-plate bottoms on the mixing tub base. Carefully remove and invert the now full cartridge. Assemble the nozzle adaptor and nozzle onto the cartridge and insert the rear plunger.

Crack Sealer Plus is available by contacting our sales office 0n 0845 400 6666 or e-mailing salesdepartment @wykamol.com

 

Apply to become an approved installer

 

Find an approved installer

 

Product Enquiry

 

Interactive masonry repairs

Riba Product Selector
RIBA CPD Providers Network.gif
The Association of Building Engineers
Wykamol Group. Thor Helical Remedial is part of Wykamol group
Page updated 24th Jul 2013, 14:44
BRICK | instant websites

© 2017 Wykamol Group. All rights reserved.
http://thorremedial.com/crack-stitching/products/crack-sealer-plus.html

Page updated 24th Jul 2013, 14:44

Designed and maintained by Brick technology Ltd.
BRICK | Instant Websites