Webac 240

WEBAC®240 is an injection gel designed for making new sealing surfaces (curtains) in foundation soil situated in close proximity to the building component or within the building structure.

Areas of application are e. g. the sealing of tunnel, shaft and sewer systems, abutment walls and wing walls in bridge constructions as well as the sealing of partially non-basement buildings.

WEBAC®240 is suitable as a post-construction, rear-side sealing for construction, expansion and sewer joints covered with soil.

WEBAC®240 can also be used within porous structures (e.g. masonry) and for the installation of post-construction water stops.

3-comp. polyacrylic gel
Swells upon contact with water
Fulfills the requirements of the KTW recommendations for large- and small-surface sealings (D1 + D2) in contact with potable water (test certificate)
Fulfills the requirements of ground water hygiene for large- and small surface sealings (D1 + D2) (test certificate)
Suitability test according to the requirements specified in the gel injection guideline 804.6102
(former 835.9201) of the DB AG

Applications

Curtain Injection: Post construction surface sealing of undergrade building components.

Waterproofing of stuctures: Remedial injection system for the repair of DPC's

Joint sealing: sealing of construction joints in structural and civil engineering.

Foundation pit sealing: sealing of water bearing cracksand joints in foundation pits

Canalisation repair: Sealing of joints and cracks in canals and shafts.

Sign in or register for access to our product guides

Accessories

Webac IP 2K-F1

Webac packers